Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
time to push the limits
#21
I know the feeling Chuck. Are you considering reversing you decision to make her a dedicated trail rig?
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#22
Unless you pull the tags it never has to be a dedicated anything. I hardly ever drive mine(gas prices:cryingSmile but some times I need to move something in the yard and I use it, just because. I have even been know to just jump in and drive it threw the back woods just so I can remember what its like.:mug:
There is nothing like jumping in and cranking down the street in an eb:rebel:
Broncomatt
Reply
#23
Quote:There is nothing like jumping in and cranking down the street in an eb
Broncomatt

I second!!! And I love to tell people "NO! It's not a Jeep!" I think it is about time to pull my doors off for the summerConfusedmokin:
Reply
#24
Oh crap. I just remembered I have to get my tag back from florida to put on the bronco when I get back.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#25
here's my junk in the middle of suburban junk:hysterical:


Attached Files Image(s)
   
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#26
That's awesome Chuck! Next you need to bring it in to work covered in mudConfusedupergrin:
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
#27
been there done that...kinda got asked in(a nice way) to leave the marsh next to the river c'mon! But, they never came back the next few times me and Scott blazed a fresh dirt road through the lot:hysterical:

I can say, today was a good test(mid 80's) she ran a constant 180. Every time I stopped(bank/school) she would rise to 190, then com eright down to 180 after restart. I did notice the back driver caliper drag once(created some smoak) but, never happened again, and the heat was pouring in from the dang floor:eek: I even have the fresh air duck disconnected, so no moving air should be forced into the heater housingConfusedcratchhe: I dont think the heater fan was running either, when it is...the volt drops to 12.5-13v for low and 12v for high. All the voltage was at 14 all evening. I just got home, so now I will check a few things out...I do know this gear banger is not for daily use. Might switch back to stock 435 shifter for a while.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#28
Do you get a lot of stairs when crusing down the road? I know I do, I see people looking around at stop lights to find out who in the hell is making all that noise. I love it!:rebel:
Reply
#29
yeah, I even got a couple of waves from a 2 chicks at the stop light:xyxthumbs:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#30
My headers really build a lot of heat under the tub. It seems to migrate in through my removable tunnel cover. Feels pretty good in the winter, but will cook your right ankle in the summer.

I want to vent my inner fender wells to see if it helps dissipate some of the heat.
'72 TBA...
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  It was the first time. . . nhopman 10 2,846 03-15-2016, 12:12 AM
Last Post: snipes243
  Well it is time to build one from scratch... shon 4 2,523 05-25-2015, 04:28 PM
Last Post: Crawdad
  New guy, 1st time Bronc hankster 17 2,601 11-28-2010, 03:19 PM
Last Post: hankster
  first time in the mud with gumby! gumby93 8 2,379 07-22-2009, 08:57 AM
Last Post: SC74
  OK, I,m on the fence and need a push 66stocker 20 3,996 06-14-2009, 01:34 PM
Last Post: snipes243
  to much time berg bronco 13 2,793 06-05-2009, 09:19 AM
Last Post: jollygrngiant
  83 bronco (1/17/2008) snow time black_nite 2 1,087 01-17-2008, 11:36 AM
Last Post: DeTowman
  time for new axles! blazinchuck 48 6,719 12-10-2007, 06:53 PM
Last Post: fdezone

Forum Jump:


Users browsing this thread: 1 Guest(s)