Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Helicoil tap and tool
#1
I need to repair one of the pan bolt holes on my C4 (5/16-18). Thinking about going the Helicoil route but I have no intention of paying 30.00 to make a single thread repair.

I think I could probably make the installation tool out of an old flathead screwdriver with a slit cut in the blade. I really need to know if the taps that come with the kits are a special pitch thread or something standard that I would have in my collection of taps.

Thx.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#2
what size is the original bolt hole? I might have the correct heli kit at work and you could get it with the jack. Also the heli's are a completely different tap size.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#3
the original c4 pan bolt hole size is 5/16-18
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)