Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ignition switch??
#1
Well, I just replaced my ignition switch a couple days ago b/c almost every time I would go to cut it off, my bronco would stay running. And tonight when driving to the gas station, I went to get out and cut the bronco off, sure enough....it kept running!! WTF!! I did some research and talked to chuck, chuzie, etc..and they all agreed that I should replace that switch. And that should fix the problem. But, it didn't!! So....I'm stuck in a predicament.

Your thoughts as to what I should try next.........
[SIGPIC][/SIGPIC]
79 FS 351M, Trac loc HPD44, Detroit 9", 4.56's, 37 Toyo's, 17" Helo Maxx 6
Reply
#2
Hmmm. Remind me again, are you carb or EFI? What exactly did you replace, the entire ignition switch assembly, right? I hate to say it like this, but you replace the part behind the dash that the wires plug into, right? Sad sorry.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#3
chuzie Wrote:Hmmm. Remind me again, are you carb or EFI? What exactly did you replace, the entire ignition switch assembly, right? I hate to say it like this, but you replace the part behind the dash that the wires plug into, right? Sad sorry.

Carb! Yes, I replaced the "electrical" part of the ignition behind the dash. Not the part with the keys. Its got me dumbfounded. I'm not the best when it comes to electrical either. Weird thing is, it never did this when I DIDN'T have my D.U.I distributor. But I figured the ignition hadn't been replaced in the life of the Bronco(32 yrs)
[SIGPIC][/SIGPIC]
79 FS 351M, Trac loc HPD44, Detroit 9", 4.56's, 37 Toyo's, 17" Helo Maxx 6
Reply
#4
curious...could the ign control module under the hood be messing up? and cause these same issues? I have 2 that came with my 77...im sure they are the same. ill bring them tomorrow for ya to try
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#5
blazinchuck Wrote:curious...could the ign control module under the hood be messing up? and cause these same issues? I have 2 that came with my 77...im sure they are the same. ill bring them tomorrow for ya to try

Its worth a shot!! Thanks chuck!
[SIGPIC][/SIGPIC]
79 FS 351M, Trac loc HPD44, Detroit 9", 4.56's, 37 Toyo's, 17" Helo Maxx 6
Reply
#6
I thought the DUI did away with the control module?
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
#7
Gonna have to explane what your running. It realy sounds like something is back feeding power to the dist. If the dist is a DUI it should not have any other modual. Give us the brake down, this sounds interesting.....
[SIGPIC][/SIGPIC]
Reply
#8
We hit it with a meter the other night and could not duplicate the problem. The 12v run signal is working as advertised. Brian is carrying a meter around so the next time it happens he can test to see if the 12v run signal is present or not with the key off. This will at least give us a direction to go in for troubleshooting.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#9
SC74 Wrote:I thought the DUI did away with the control module?

Yea Robert, you're right. It does do away with the control module. I had a brain fart the day chuck told me he would bring 2 spare modules:banghead:




Its only stayed running 1 time since the meeting. And of coarse I didn't have the meter with me. I'll keep ya'll posted
[SIGPIC][/SIGPIC]
79 FS 351M, Trac loc HPD44, Detroit 9", 4.56's, 37 Toyo's, 17" Helo Maxx 6
Reply
#10
Well your bronco gave my bronco some kind of disease. Now mine keeps the starter running even after it is started. 3 times now I have had to jump out and disconnect the battery cable to prevent the starter from destroying itself and the flywheel and killing the battery.

I changed the relay and now i have to change the ignition switch when i get back in town.

THANKS A LOT!!!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Headlight/Dimmer Switch??? Broncitis 4 1,148 03-30-2015, 03:39 PM
Last Post: Bronco Biff
  Ford D.U.I. Ignition scbronco 14 8,024 09-06-2012, 06:03 PM
Last Post: SC74
  Ignition missing and jumping tach jdowns67 5 2,196 03-23-2011, 01:02 PM
Last Post: jdowns67
  A good article about ignition timing jdowns67 0 2,223 10-17-2010, 08:52 PM
Last Post: jdowns67
  Headlight switch 744x4 0 1,366 10-03-2010, 07:26 PM
Last Post: 744x4
  Pertronix Solid-State Electronic Ignition jrshepherd 6 5,318 11-08-2009, 11:26 PM
Last Post: jrshepherd
  Pertronix Ignition Problems. Mill Knob 13 3,585 09-09-2009, 01:32 PM
Last Post: SC74
  Ignition Fuse Blown?? SC74 6 2,396 02-12-2009, 11:14 PM
Last Post: Mill Knob
  elec. Ignition berg bronco 4 1,955 01-25-2009, 08:36 PM
Last Post: berg bronco
  Ignition rcflyer23 7 3,294 11-02-2008, 08:15 PM
Last Post: rcflyer23

Forum Jump:


Users browsing this thread: 2 Guest(s)