08-24-2008, 12:07 AM
What shape are you frame horns in? As long as you can cut the bumper off that you have on there now it shouldn't be too hard to pry your frame horns out enough to accept the 4" C-channel that slides into them.
Two bolts in each frame horn - one in the top and one in the bottom. We're not going to drill the holes in the C-channel so you can decide exactly how far in/out you want it. All you'll have to do is slide the channels in and mark mark where you want your holes - drill them - and waaalaa!
Glad you like it!
Two bolts in each frame horn - one in the top and one in the bottom. We're not going to drill the holes in the C-channel so you can decide exactly how far in/out you want it. All you'll have to do is slide the channels in and mark mark where you want your holes - drill them - and waaalaa!
Glad you like it!
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
![[Image: Bannerpic.jpg]](http://i259.photobucket.com/albums/hh295/SC74Bronco/Bannerpic.jpg)