04-28-2009, 07:08 PM
I want more gearing options...no Lomax for the np205F.So i would like to hear from some doubler guys that are running the stock wheel base. I'm concerned about the short rear drive shaft! Im using a HPD60/10.25,np235/205 now. I even placed a call with Klune-V for their option(nothing back yet). I have 4.88 gears and running 42"Iroks with 3.5" lift dove-tailed front(14")/rear(20"). I posted this on classic also for the west coasters.
as for the front axle...I want to move it forward before I weld it permanent. Im thinking I can move it forward and use the same steering box, but run the high steer arms behind the knuckles...any thoughts guys??
as for the front axle...I want to move it forward before I weld it permanent. Im thinking I can move it forward and use the same steering box, but run the high steer arms behind the knuckles...any thoughts guys??
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.