08-26-2009, 05:10 PM
66stocker Wrote:It sounds like this all started when you did your tune up so perhaps it's not the carb.
Did you set your points by gap or do you have a dwell meter?
Are the plugs gapped correct?
have you tried pulling the plug caps off one at a time to see if you have a cylinder thats not firing?
Spend the $100 and put a pertronix and coil in it!
If you want you can drive it over to my house and we will put a meter on it and check everything out.
hey goerge I have a pertronix sitting in my toolbox let me know if you want it.
you probably want to stay stock don't you
cratchhe:
Life is short------drive your bronco everyday!