12-16-2010, 12:32 AM
I guess those last 2 pics were out of order. Anyhow, the next project is cleaning the frame up and modifying it a bit. All the shocks will be mounted to the cage, so the shock mounts were cut off. The rear springs will be moved back a few inches to stretch the wheel base a little. The front radius arm mounts will be cut off and new mounts fabricated for use with some heim ends. The huge metal 'bumper' on the front is going to be cut off and something else fabbed later on.
I had seen someone modify some radius arms using some tubing a while back. Looked pretty nice, so I thought it would be best to copy the design. The tube is 2" OD 0.250" wall DOM with 1-1/4 heims.
I had seen someone modify some radius arms using some tubing a while back. Looked pretty nice, so I thought it would be best to copy the design. The tube is 2" OD 0.250" wall DOM with 1-1/4 heims.