12-22-2010, 05:51 PM
(This post was last modified: 12-22-2010, 05:54 PM by broncosbybart.)
Here is the start of fabbing some radius arm mounts for the frame. Gonna cut out 4 pieces, reinforce them and weld it all together. They are being made from 1/4" plate.
While I am here, it looks like the rear cross member is going to be in the way for the relocated rear axle. Might as well cut it out and make some new cross members from 1.75" DOM.
Right now the frame is pretty well cleaned off and about ready to start having all the mounts welded back on it.
Well, that is about all for now folks. We are getting ready to travel for the Christmas holiday. Everyone have a Merry Christmas. Check back in around the first of the new year!!
While I am here, it looks like the rear cross member is going to be in the way for the relocated rear axle. Might as well cut it out and make some new cross members from 1.75" DOM.
Right now the frame is pretty well cleaned off and about ready to start having all the mounts welded back on it.
Well, that is about all for now folks. We are getting ready to travel for the Christmas holiday. Everyone have a Merry Christmas. Check back in around the first of the new year!!