02-26-2011, 12:33 AM
I used masking tape to mark out where I wanted to cut the front fenders. A big thanks to Nicks Trix for them!!!
They were rotted pretty badly in the front corners and lower sections. Most of that is gone now. A 4-1/2" grinder with a .045" cutting wheel works great for this task.
![[Image: P1010001.jpg]](http://i786.photobucket.com/albums/yy147/broncosbybart/ECORS%20Racer%20Parts%20Gathering/Finishing%20Cage/P1010001.jpg)
![[Image: P1010012.jpg]](http://i786.photobucket.com/albums/yy147/broncosbybart/ECORS%20Racer%20Parts%20Gathering/Finishing%20Cage/P1010012.jpg)
They were rotted pretty badly in the front corners and lower sections. Most of that is gone now. A 4-1/2" grinder with a .045" cutting wheel works great for this task.
![[Image: P1010001.jpg]](http://i786.photobucket.com/albums/yy147/broncosbybart/ECORS%20Racer%20Parts%20Gathering/Finishing%20Cage/P1010001.jpg)
![[Image: P1010012.jpg]](http://i786.photobucket.com/albums/yy147/broncosbybart/ECORS%20Racer%20Parts%20Gathering/Finishing%20Cage/P1010012.jpg)
![[Image: P1010011.jpg]](http://i786.photobucket.com/albums/yy147/broncosbybart/ECORS%20Racer%20Parts%20Gathering/Finishing%20Cage/P1010011.jpg)