03-08-2011, 10:38 AM
Next, I cut some holes in the firewall for the wiring harness and the intake. Nick H came down on Sat and got a lot done on the harness install. Thanks again for all the help with that!! We had a few sensors that didn't have the same plug ends, so we had to do some switching. The IAB, TPS, and ACT sensors all had different plug ends. The ECT did as well, but I will get a new mustang one for that. The harness and computer are original Ford Mustang pieces out of a 90 HO. Nick went through it all and saved me a ton of time!!
I am using the Explorer intake with the ACT in the intake tube. Here is what it will be doing.
The 70mm MAF sensor is out of a Crown Vic (neither the stock mustang or the explorer MAF will work correctly). Part number on the MAF is F2VF-12B579-A2A. It is found on a host of donor vehicles.
1995-94 Mustang 3.8L F2VF-12B579-A2A,
1994-92 Crown Victoria 4.6L F2VF-12B579-A2A,
1995-94 Mustang, Mustang Cobra 5.0L F2VF-12B579-A2A,
1994-92 Town Car 4.6L F2VF-12B579-A2A,
1994-92 Grand Marquis 4.6L F2VF-12B579-A2A
While I was at it, I started on the new battery box location.
I am using the Explorer intake with the ACT in the intake tube. Here is what it will be doing.
The 70mm MAF sensor is out of a Crown Vic (neither the stock mustang or the explorer MAF will work correctly). Part number on the MAF is F2VF-12B579-A2A. It is found on a host of donor vehicles.
1995-94 Mustang 3.8L F2VF-12B579-A2A,
1994-92 Crown Victoria 4.6L F2VF-12B579-A2A,
1995-94 Mustang, Mustang Cobra 5.0L F2VF-12B579-A2A,
1994-92 Town Car 4.6L F2VF-12B579-A2A,
1994-92 Grand Marquis 4.6L F2VF-12B579-A2A
While I was at it, I started on the new battery box location.