04-17-2011, 11:31 PM
Got some more work done. I found a pusher fan from an A/C condesor at the bone yard. Got it mounted to the radiator and wired in. Got a few nick-nacks and am working on those as well- finishing the plumbing for the trans, fastening the fuel lines to the frame, cleaning up the wiring, and the like.
Here are a few pics.
First is the fan mounted in.
Second/Third are some of the wiring in the engine compartment. I got a mega fuse holder from Amazon (couldn't find one locally). I wanted to make sure the alternator to battery terminal was fused. It is mounted to the cowl, next to my fuse block for all the other circuits. Everything came out well and worked the first time (except for the tail lights). I had to put some new bulbs in there as the old ones were corroded. Otherwise, everything works exactly like it should (imagine that)....
Here are a few pics.
First is the fan mounted in.
Second/Third are some of the wiring in the engine compartment. I got a mega fuse holder from Amazon (couldn't find one locally). I wanted to make sure the alternator to battery terminal was fused. It is mounted to the cowl, next to my fuse block for all the other circuits. Everything came out well and worked the first time (except for the tail lights). I had to put some new bulbs in there as the old ones were corroded. Otherwise, everything works exactly like it should (imagine that)....