04-18-2011, 10:08 PM
(This post was last modified: 04-18-2011, 11:13 PM by broncosbybart.)
Looks good in the pics. There are some imperfections- it is a trail truck. I did manage to make the paint run in 2 spots as well. Oh well...
While waiting for the white to dry I fabbed up some quick release fire extingusher brackets. I took lots of pics and will put a write up on here for them, if anyone wants to do a DIY project. Otherwise, feel free to contact me on how I made them.
I had to make a total of 2 brackets for 2 fire extinguishers. The rules state that there must be 1 on each side of the vehicle, in case it is rolled on it's side or one is inaccessible due to terrain.
While waiting for the white to dry I fabbed up some quick release fire extingusher brackets. I took lots of pics and will put a write up on here for them, if anyone wants to do a DIY project. Otherwise, feel free to contact me on how I made them.
I had to make a total of 2 brackets for 2 fire extinguishers. The rules state that there must be 1 on each side of the vehicle, in case it is rolled on it's side or one is inaccessible due to terrain.