06-25-2011, 11:19 PM
While I was at it, I cleaned up the modified track bar mount. I swapped the rock crawler coils for the coils that are in Clay's Bronco. The track bar and drag link are still parallel, but the tie rod is now under the knuckle. This should work a lot better.
Next, I moved the driver's side headlight mount in, as the light wasn't centered in the opening. I cut it as best I could and re-welded it. Came out as it should.
IF you have EFI on your rig, don't forget to unplug the computer before welding on it. Don't know if it will hurt it, but have been told it COULD hurt it- one of those Murphy's law kind of things....
Next, I moved the driver's side headlight mount in, as the light wasn't centered in the opening. I cut it as best I could and re-welded it. Came out as it should.
IF you have EFI on your rig, don't forget to unplug the computer before welding on it. Don't know if it will hurt it, but have been told it COULD hurt it- one of those Murphy's law kind of things....