07-01-2011, 10:37 PM
Got a few more things done. My right rear quarter was crinkled a bit. After this last run at URE, it confirmed that the trailing edge of the quarter opening was rubbing against the tire, and causing this. So, I made the opening bigger.
To do it, I used the 4-1/2" grinder with a cutting disc on it and some masking tape as a line to follow, just like what was done with cutting the front fenders.
To do it, I used the 4-1/2" grinder with a cutting disc on it and some masking tape as a line to follow, just like what was done with cutting the front fenders.