11-13-2011, 05:59 PM
Built up some H1's for some trail riding. They have 36" TSL SX's on them. I removed the rubber runflats (don't know who installed those, but they must be pretty smart). It took the engine hoist to get them back out.
I welded on some rim stiffeners and installed some Stazworks inserts. They are supposed to be unbreakable. Got them primed and decided I'd just leave them in primer. Put some new o-rings in and bolted them back together and threw them on the rig. Aired them down to 5 psi. Could probably go less. We will see.
I welded on some rim stiffeners and installed some Stazworks inserts. They are supposed to be unbreakable. Got them primed and decided I'd just leave them in primer. Put some new o-rings in and bolted them back together and threw them on the rig. Aired them down to 5 psi. Could probably go less. We will see.