10-20-2013, 02:07 PM
Yesterday was a beautiful day for some fab work. Cool, overcast, and no big wind gusts. I prefer doing fab work outside to keep the dust and debris down in the garage. Got to work in the AM while it was still foggy and damp.
I started with the front fenders. The mounting lip along the top of both fenders were rotted. I cut them off of the damaged fenders I removed. Then I cut them off of the good fenders, set it all in place, and welded it it all together. Guess I forgot to take pics of it. With the front fenders mounted up, I marked them and then cut the wheel openings. After some debate, I think I'm going to put fender flares on it.
I started with the front fenders. The mounting lip along the top of both fenders were rotted. I cut them off of the damaged fenders I removed. Then I cut them off of the good fenders, set it all in place, and welded it it all together. Guess I forgot to take pics of it. With the front fenders mounted up, I marked them and then cut the wheel openings. After some debate, I think I'm going to put fender flares on it.