08-15-2015, 12:13 PM
Running some numbers at 1,000 psi supply with different rods for push / pull.
5/8 rod = 1767 / 1460 psi = 307 diff
3/4 rod = 1767 / 1325 psi = 442 diff
1.00 rod = 1767 / 982 psi = 785 diff
Should I be concerned about psi difference in pull between the different rods or is it pretty much nominal?
I am running an unknown brand 1.5x8 with 5/8 rod.
Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
5/8 rod = 1767 / 1460 psi = 307 diff
3/4 rod = 1767 / 1325 psi = 442 diff
1.00 rod = 1767 / 982 psi = 785 diff
Should I be concerned about psi difference in pull between the different rods or is it pretty much nominal?
I am running an unknown brand 1.5x8 with 5/8 rod.
Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
mokin:
Roads? Where we're going, we don't need roads.
![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
mokin:Roads? Where we're going, we don't need roads.