front axle vent

[KMIBronco]

Now that i need this i can't find who sells them.. The piece that threads into the d44 case that hold the brake block and the vent line hooks to. Where can i find one. Ken:banghead:

[blazinchuck]

that should be easy find on any old 9" or D44 axles(junk yards)...I might even have one. I let ya know Ken,Chuck

[Ogeechee 4x4]

If chuck doesn't i probably do. i'll look when it gets daylight.

[KMIBronco]

Thanks. dont know what happen to mine, po used a solid bolt.ken

[66stocker]

I think national parts depot sells them for about $10. Check out their online catalog.

http://npd.dirxion.com/Main.asp

Bill

[KMIBronco]

Thanks, Ole bronco buddy Tim has graciously donated one. Just for info i did find that wildhorses has em $12.
Ken

[744x4]

Run a # 31 bit down the center hole to get the crud out of it so it functions properly.I had a leaky 9 for a long time and found out the vent was clogged making it build pressure and the axle seals would leak.20 seconds with the bit fixed it right up.Now I do this to every axle I rebuild and you wouldnt believe the crud that comes out of them.

[Timstrk]

It was clean when I sent it to him. Inside and out.

Tim
74 Bronco Ranger halfcab
w/toys