Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need some advice
#11
A ground switch is a great idea but I didn't know they even existed until you said something.

Actually, I thought about the interlock option but was not sure how to go about executing it. Now that I know I can track the parts down relatively inexpensively and order from Napa, that is exactly what I am going to do when I get back.

Thanks Traveler!!!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#12
Thanks for all the great ideas for my elec.fan. :xyxthumbs:

But this thread was actually started for advice on my Power steering leaks. :hysterical: :hysterical:

Any ideas?
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy:

1985 Yoda 4Runner :xyxthumbs:
Reply
#13
Sorry for getting you off track. That is my fault. How bad is the leak? Frankly, if it is like a couple of drips per hour I would say live with it if you don't feel like an overhaul. I certainly would not recommend a seal change unless you are experienced since it could be a number of seals and the reasons I previously posted.

If you are looking at a spray type leak I would fix it now. If the hydro is atomizing in the engine bay you are asking for a fire.

Otherwise just keep an extra Qt of fluid with you and don't forget to keep her full.

You may also want to look into some type of additive/ seal conditioner you can add to the system to try and fix the problem. Just make sure it is compatable with the fluid you are using. Which brings me to my next question- What type of fluid are you using? Some fluids can help or hinder a leaky system.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#14
Ok thats more like it. The leak is not bad at all. Just a little disappointing considering. Anyway I have put some "lucas" additive but no particular oil in general. Chuck gave me some synthetic but have not used it yet. Also I tend to get lazy and I let it dry up once but now I am checking it regular. I think...no not think...I know I will just deal with it for now. I will reinstall it this morning.
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy:

1985 Yoda 4Runner :xyxthumbs:
Reply
#15
Make sure you run the purging procedure too. Between Type F and Dextron, I am not sure which one is better to run. I would almost venture to say Dextron because it is less abrasive against your old seals than Type F.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#16
The input seal is not hard to change. I am pretty sure you can remove it without opening the box. that is the safest way.
then just drive the new seal in.
Straight forward job.

I can look for a switch next week, and mock you up a diagram. I am out of town visiting my gorgeous wife.
Reply
#17
Flatterer :love:

Can't wait to see you. :kiss:
The Trucks
[Image: img_0041.2.jpg]
The Kompany Kool AKKountant
Reply
#18
Audra Wrote:Flatterer :love:

Can't wait to see you. :kiss:
ok, now I see why we got the kissin smileys:rubeyes:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#19
We gots kissing smileys because you said you wanted EVERYTHING :thefinger::hysterical:
The Trucks
[Image: img_0041.2.jpg]
The Kompany Kool AKKountant
Reply
#20
Me no understandy.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  What to do advice Phoneman 5 3,052 05-14-2014, 05:56 PM
Last Post: Phoneman
  A little advice rancej 5 1,727 03-19-2011, 11:53 PM
Last Post: rancej
  Cam advice.... chuzie 32 11,190 02-01-2011, 07:34 PM
Last Post: blazinchuck
  Need Advice on 351W Headers 73Bronc 9 3,386 10-15-2009, 12:04 PM
Last Post: wormhole
  Need advice on tube flaring problem... chuzie 8 1,571 08-28-2009, 05:42 PM
Last Post: 66stocker
  power steering set up advice ?????? broncomania 6 5,215 04-09-2009, 06:44 PM
Last Post: broncomania
  need some parts and advice offshorecorley 1 3,044 12-03-2008, 08:21 PM
Last Post: offshorecorley
  Engine build advice cuz1 6 1,557 06-27-2008, 05:35 PM
Last Post: bucketobolts
  NEED SOME ADVICE PLEASE DUCKWORTH71/76 24 7,567 06-17-2008, 10:28 PM
Last Post: blazinchuck

Forum Jump:


Users browsing this thread: 1 Guest(s)