03-13-2009, 09:48 AM
Well my rear bumper has been in the way more than a few times so ... time for a redesign ... cut ends off and made the bumper the width of the tailgate ... with my 2" body lift the gap from that almost fit the bumper. Also cut the top portion of my frame horns back to about 1" or so from the bodymounts and notched the bottom frame horn and bent it up at an angle to "cap" off the frame. Welded a 3/16" plate to the out side of the frame where we mounted the bumper with a bolt to a nut we welded inside of the frame. Tie in the bumper with some tubing to the new/existing exo cage in the rear ... also got my front "indo" cage tied into the front frame horns ... plated with 1/4" on top of the front frame horns and gusseted that for a little extra strength and possibly a "web" look thru thr grill ... cratchhe: cratchhe: cratchhe:
:rubeyes:
Some pics with my blackberry so they are not very good ... :biggthumpup:
plate with clamps ready to weld ... bolt on iside of frame also mokin:
cutting off the extra bumper mounts with a plasma at an angle :xyxthumbs:
Blacberry pics ... :banghead: Hope you get the Idea ... better pics to come :rubeyes:
:rubeyes:
Some pics with my blackberry so they are not very good ... :biggthumpup:
plate with clamps ready to weld ... bolt on iside of frame also mokin:
cutting off the extra bumper mounts with a plasma at an angle :xyxthumbs:
Blacberry pics ... :banghead: Hope you get the Idea ... better pics to come :rubeyes:
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy:
1985 Yoda 4Runner :xyxthumbs:
Always an EB fan, lover and freak :notworthy:
1985 Yoda 4Runner :xyxthumbs: