04-05-2011, 01:32 PM
Dash panel is pretty well fabbed up. It was very hard to do without scratching the finish on the aluminum. There are 5 gauges- oil press, eng temp, trans temp, fuel level, and voltage. I will be installing a light for the check engine wire and a light for the voltage gauge, per the wiring harness schematic for the alternator.
The alt should be very easy to wire. There are only 2 small wires on my alt plug. The yellow/white is going to the terminal for the heavy alternator output wire. The green terminal is going to the ignition on circuit. Don't have it done yet- waiting on some parts to come.
The alt should be very easy to wire. There are only 2 small wires on my alt plug. The yellow/white is going to the terminal for the heavy alternator output wire. The green terminal is going to the ignition on circuit. Don't have it done yet- waiting on some parts to come.