Yesterday I relocated the PS cooler to the front crossmember. I had to replace one hose b/c it was not long enough. I hung the cooler before I installed it to the crossmember. Came back this morning and intalled cooler. I turned the wheels back and forth with front end off ground. I now know it takes 5 turns from side to side. I did it slow which got boring really quick. I've done this about three times this morning on seperate occations. The oil level is still the same. I will crank motor later on today and turn the wheels back and forth. I'll drop it and see if PS is back.
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
WANTED: auto column, gas tank, front/ rear seats