06-09-2011, 09:14 AM
what he said, for renting a puller.
as far as your oem pulley, i don't think it will fit a saginaw. i usually get a saginaw pump from the junk yard with the pulley still on it. the saginaw pulley still has to be pulled off to remove the original pump mounting bracket, 9 times out of 10. it isn't hard, with air tools. you'll need the conversion bracket available from the bronco vendors, as well as the high pressure hose. the saginaw pump is much nicer. i don't usually run a ps cooler, but it probably wouldn't hurt, if you end up having room for it.
as far as your oem pulley, i don't think it will fit a saginaw. i usually get a saginaw pump from the junk yard with the pulley still on it. the saginaw pulley still has to be pulled off to remove the original pump mounting bracket, 9 times out of 10. it isn't hard, with air tools. you'll need the conversion bracket available from the bronco vendors, as well as the high pressure hose. the saginaw pump is much nicer. i don't usually run a ps cooler, but it probably wouldn't hurt, if you end up having room for it.