10-21-2011, 08:34 PM
chuzie Wrote:DUDE! WOW! That is no joke there. My .02 are something was either left in there during the build, was sucked in through the intake, or fell apart in the intake/carb that made its way into the cylinder, jammed between the piston and the valve and caused catastrophic failure at TDC. My basis is the picture of the carb debris. What is that stuff? Where in the carb did you find it?
yeah there is an entire piston in the oil pan. :rubeyes:
That debris was actually directly underneath the carb in the intake. Those chunks of metal were sitting right there when i pulled the carb off the intake. I couldnt get the heads off but i slid my fingers into the #2 from underneath and feels like it punched/cracked the cylinder wall. Should be another good picture.
Nate