02-07-2014, 12:19 AM
I would replace the inner rocker and driver floorpan now. Then put the kick panel and door post in place. Then the outer rocker. Self tapping 'tech screws' are what I recommend to mock everything up with. You can go ahead and patch the inner apron now. That is an easy one compared to the rest...
I wouldn't bother bracing anything. It has moved around already. Biggest thing is taking your time fitting it all together correctly. If you are running doors, gut them and hang them to check things before welding it all up. Using a hardtop as well would also help. Use an ample amount of screws to position things. After rechecking everything about 39 times, then you can begin to plug weld it all together. I like to cut a 1/4" hole in the upper piece of metal that I want to weld to the lower piece. I recommend a lot of heat to make sure the weld is strong.
I wouldn't bother bracing anything. It has moved around already. Biggest thing is taking your time fitting it all together correctly. If you are running doors, gut them and hang them to check things before welding it all up. Using a hardtop as well would also help. Use an ample amount of screws to position things. After rechecking everything about 39 times, then you can begin to plug weld it all together. I like to cut a 1/4" hole in the upper piece of metal that I want to weld to the lower piece. I recommend a lot of heat to make sure the weld is strong.