12-13-2016, 05:26 PM
(This post was last modified: 12-13-2016, 05:34 PM by broncosbybart.)
They add lift to your ride height. If it will be ok as is, I'd just use the perches and modify the WH spring plates.
Oh, and if you do put new perches on it you can eliminate the shims on the leaf springs and just change the angle of the perch. That's the best way to do it but you'll need to install the drivetrain to check the driveshaft and pinion angle first.
Oh, and if you do put new perches on it you can eliminate the shims on the leaf springs and just change the angle of the perch. That's the best way to do it but you'll need to install the drivetrain to check the driveshaft and pinion angle first.