|
SOLID AXLE SWAP
|
09-12-2007, 12:08 PM
Just wondering if the guys that have done the sas swap think about using d44's (front and rear) out from under 05 wrangler rubicon would work on a 90 bII.
check them out... http://cgi.ebay.com/ebaymotors/ws/eBayIS...53041&rd=1 
09-12-2007, 01:49 PM
YOU CAN MAKE ABOUT ANYTHING WORK WITH THE RIGHT KNOWLEDGE, SKILL & EQUIPMENT I USED A DANA 44 FRONT & FORD 9" REAR FROM A '79 FULL SIZE BRONCO ON MY B2 AND I HAVE LESS THAN HALF OF THE BID PRICE IN IT, BUT I ALSO OWN A MACHINE SHOP WITH MILLS, LATHES, SAWS ETC AND THE BENEFIT OF 30+ YEARS METAL WORKING EXPERIENCE SO I EITHER FABED OR CUT AND MOVED WHAT NEEDED TO BE DONE. BUT IT CAN BE DONE!
RONNIE
'85 Bronco II 7" lift
BW1350 doubled 85:1 final crawl Hydro-assist steering Dana 44 front lincoln locked Ford 9" rear trac-loc Mile Marker 8000# winch http://www.gulchesorvpark.com
09-12-2007, 10:20 PM
the width i think would be perfect for the b2 alot of guys run d30s out of xjs and plus if you get these they are geared and locked but the rear would be kinda hard but you could cut off the coils stuff and put leaf spring perches on it
86broncoII with 2in of lift 31x!2.50 SUPER SWAMPER BOGGERS steeringstableizer, skyjacker ext brakelines, and james duff prerunner front bumper
09-12-2007, 10:25 PM
Not a bad deal,like Ben said/gears- lockers-4wheel disc. sweet set up!Chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
09-12-2007, 11:06 PM
I'd go for that!! The gears and air lockers alone will run you that price.
Brian
[SIGPIC][/SIGPIC]
79 FS 351M, Trac loc HPD44, Detroit 9", 4.56's, 37 Toyo's, 17" Helo Maxx 6 
09-13-2007, 09:47 AM
You guys keep talking, I'm getting ideas for my '88 project-when I hit the lottery!!! :lol: :lol:
Psalms 27:1
[SIGPIC][/SIGPIC]
09-14-2007, 12:06 AM
ok i was just thinking about this today but i think the d44 that came in rubicons were elockers not air lockers so check out these axles before you get them and the rear was a limited slip
let me check on some jeep sites and come back to you
86broncoII with 2in of lift 31x!2.50 SUPER SWAMPER BOGGERS steeringstableizer, skyjacker ext brakelines, and james duff prerunner front bumper
09-14-2007, 05:24 PM
never mind found out they are air lockers but did find out the new jk's are e lockers
86broncoII with 2in of lift 31x!2.50 SUPER SWAMPER BOGGERS steeringstableizer, skyjacker ext brakelines, and james duff prerunner front bumper
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Need input on my NV4500 swap!! | knoxville714 | 12 | 5,822 |
06-20-2016, 09:59 PM Last Post: blazinchuck |
|
| Manual to Auto swap and Auto to manual swap | wepuckett | 1 | 1,651 |
07-24-2014, 03:26 PM Last Post: wepuckett |
|
| Axle Tube Vents | Casey835 | 4 | 1,436 |
03-01-2013, 08:20 PM Last Post: Casey835 |
|
| ***9" Axle Gurus...Ring gear dug into pilot housing!** | chuzie | 7 | 2,462 |
12-05-2012, 12:35 AM Last Post: chuzie |
|
| Brake problems after the 5.0 swap. | BucknEB | 10 | 2,608 |
10-29-2012, 03:07 PM Last Post: BucknEB |
|
| Axle / Gear gurus help!! | SC74 | 4 | 2,477 |
03-28-2012, 08:52 AM Last Post: SC74 |
|
| F150 axle shaft tech | blazinchuck | 12 | 3,185 |
12-03-2011, 09:34 PM Last Post: broncosbybart |
|
| AOD SWAP TO A C6 | markharrell | 3 | 1,736 |
09-30-2011, 09:18 AM Last Post: jollygrngiant |
|
| Stuck rear axle? (9") | Action | 6 | 1,579 |
06-24-2011, 09:42 PM Last Post: jollygrngiant |
|
| rear axle shims? | berg bronco | 15 | 2,540 |
01-04-2011, 09:52 PM Last Post: blazinchuck |
|
