90 Bronco Ball Joint Replacment

[2000F150SAS]

Any one have Tech Artical for replacing ball joints?

Thanks

[broncomatt]

I have several shop manuals, alldata, or I can just try and tell you. I will say you need a ball joint tool. I got mine from OTC, not cheap! You can rent them from most parts stores, not sure how much.
I wont be able to write something up untill tonight, busy day at work.
Broncomatt

[2000F150SAS]

I found this link, it's not bad i'm just not sure about the 4x4 hub removal i never done one of these. (We have Auto. Hubs)

Any help would be great, thanks

http://www.off-road.com/trucks4x4/articl...?id=198389

John

[JayT]

ahh... pulling off the hub is relatively easy. You'll need a hub socket (I'll lend ya mine, if you want)... Removal of the ball joint is the hardest part, but that might just be the years of wheelin mine before I had them done. (yeah, I had a shop do my ball joints, while they had my ride, putting in my gears). There's a few points that I lost.

Gimme a few and I'll post up a PDF from Alldata...

JayT

[JayT]

Here's a PDF from AllData... let me know if you need my hub socket... or a hand... I'll meet ya around McGees Crossroads - I should be around all day.

[2000F150SAS]

BIG THANKS for JAYT!!:biggthumpup:

I know what i'm doing New Years Day.

John

[JayT]

No prob... That's what we're here for! Makes it easy when you ask about the same ride I've got!

give me a holler if you need a hand.

JayT

[johnpaulgolf]

Go JayT go JayT go JayT go JayT ... :biggthumpup: :notworthy: mokin:

Gotta love the "CREW" ... see ya ... :chili:




mokin:


:popc1: