Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Spark Plug gaps for a 351 Windsor
#1
I removed my old sparkplugs from the block this past weekend while installing my new headers. I figured it would be good to install new ones. I forgot to ask the salesman what the gap should be for my size motor. Does anyone know what the gap should be? 0.040 may be?? Thanks for the suggestions and let the debate begin!
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
Reply
#2
on a stock late model ignition its .044''. If you have a hotter coil it could be opened up more.
Stupid hurts when it catches up, and it WILL catch up!


[SIZE="4"]Founding member of the "cheap bastards 4x4 gang''[/SIZE]
[Image: Outalne_017.gif]
Reply
#3
Sparkchaser,

The motor is a 351 W form a 1972 Gran Torino. It has been bored .010 over with stock coil. Would a .044 gap be adequate?
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
Reply
#4
sparkchaser Wrote:on a stock late model ignition its .044''. If you have a hotter coil it could be opened up more.

2x what he said:imwithstupid::hysterical:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#5
a stock 71 cleveland was .040'' with points. I'd split the difference and go .042. Oh yeah old fords don't like expensive spark plugs.Don't spend much just stick with some autolites or something.
Stupid hurts when it catches up, and it WILL catch up!


[SIZE="4"]Founding member of the "cheap bastards 4x4 gang''[/SIZE]
[Image: Outalne_017.gif]
Reply
#6
I got the Motorcrafts $2 each I think. What might be a good upgrade to a coil?
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Stainless/ Coated Headers needed- 1995 Bronco 351 Windsor .20 over trick flow heads jrshepherd 1 3,214 05-22-2018, 09:38 PM
Last Post: broncosbybart
  New Wiring for a 351 knoxville714 10 6,282 02-23-2017, 03:01 PM
Last Post: tcb3078
  '94 351 Rear Main replacement JayT 5 1,635 12-22-2012, 05:34 PM
Last Post: JayT
  351 issues gumby93 18 6,292 09-29-2012, 07:30 PM
Last Post: blazinchuck
  Do vacuum lines plug in here? Ogeechee 4x4 3 1,311 09-28-2011, 06:33 PM
Last Post: markharrell
  1996 5.8L spark plug wires and coil jrshepherd 0 1,010 02-08-2011, 06:16 PM
Last Post: jrshepherd
  Spark Plug wire installation jrshepherd 2 1,153 12-19-2010, 12:13 PM
Last Post: jrshepherd
  Changing spark plugs 1996 5.8L jrshepherd 0 836 12-13-2010, 10:42 PM
Last Post: jrshepherd
  Torque Spec. Spark Plugs- 1974 302 v8 jrshepherd 4 2,055 01-24-2010, 12:47 PM
Last Post: jrshepherd

Forum Jump:


Users browsing this thread: 1 Guest(s)