Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Broncitis Rat Rod build thread.
#91
Nick from Nicktrix sent me this link to a company in Winston Salem and they are supposed to rebuild steering boxes. I will call them in the morning.

http://cjrproducts.com/
Reply
#92
I know psc rebuilt mine before I bought the bronco
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#93
I talked with them at CJR this morning and plan to drop my box off with them in the morning. When done they will ship back to me. They seemed knowledgeable on the phone and hopefully it will be a local option for us in the future. Pricing was somewhere in the 250 to 300$ range according to what they have to replace after tear down and inspection.
Reply
#94
Looking forward to seeing how it turns out as I purchased an original ps box that was told it needs seals but might just have them go through it if they do good work.
Reply
#95
Try AGR in Texas they are 250 rebuilt with billet caps and front cover. They have been top notch to deal with.
68 Half cab
Reply
#96
West Texas Offroad gave me a price of $150 or so for a rebuild with all new seals. They also said they could turn my 6 turn box into a 4 turn box for another $150 or so. What is the problem with them so that I know before I end up taking mine off the rig?
Reply
#97
Hopefully Snipes will sound off and tell you what they did to him Dixieboy. If you wnat you can read this thread to see what transpires in a transaction with them. http://www.cb4x4.com/forums/showthread.p...eering-box . All it takes is one aws-it to destroy consumer confidence.
Reply
#98
I used them 10 years ago with no issue but after what clay experienced, i won't go back.

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#99
dixieboyz13 Wrote:West Texas Offroad gave me a price of $150 or so for a rebuild with all new seals. They also said they could turn my 6 turn box into a 4 turn box for another $150 or so. What is the problem with them so that I know before I end up taking mine off the rig?
It all boils down to there customer service is pretty terrible when dealing with issues. Any of the rebuild company's can do the 6 to 4 turn conversion for around the same price. If I remember right the rebuild and conversion was 300 ish from AGR. My advise would be to call and talk to the guys great people. For the recorded I also talked to PSC, they were great to deal with answered a ton of questions and I didn't even buy anything.
68 Half cab
Reply
Dropped my steering sector off at CJR Products in Winston Salem this morning. Shop was impressive and Jeff was very nice to deal with.[Image: a9604b99a44aa1ff9a9c1d5e88ae69f5.jpg]

Sent from my NEC-NE-201A1A using Tapatalk
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Lil Red Riding Hood Build Broncitis 11 6,739 03-04-2016, 12:14 AM
Last Post: wepuckett
  Manual brake push rod??? chuzie 13 4,463 01-06-2014, 03:04 PM
Last Post: broncosbybart
  Irmo73's Build Irmo73 159 22,564 03-09-2012, 01:13 PM
Last Post: Irmo73
  92 Fullsize Build - Scotts Bronco nitro 44 8,607 01-12-2012, 08:45 AM
Last Post: nitro
  Please educate me on 3 speed trans RAT & RAN? Mill Knob 11 6,128 01-11-2011, 10:34 PM
Last Post: Mill Knob
  Stock 66 interior rebuild thread 66stocker 37 11,061 04-03-2010, 11:07 AM
Last Post: 66stocker
  Need Tie-Rod Reamer 2000F150SAS 0 1,650 10-20-2009, 08:33 AM
Last Post: 2000F150SAS
  miscellaneous ford tech thread... blazinchuck 0 2,449 02-17-2009, 11:02 AM
Last Post: blazinchuck
  70 early bronco (mild build up) broncomania 8 1,920 12-09-2008, 11:56 PM
Last Post: broncomatt
  My new horse: 1991 Bronco trail build. manny 5 4,717 09-11-2008, 12:54 PM
Last Post: manny

Forum Jump:


Users browsing this thread: 4 Guest(s)