07-25-2008, 01:23 PM
That should be the early BB housing on the caliper brackets. They should fit a full size or F150 rear. There is also "Torino" big bearing that floats around out there.
I used the brackets, rotors, and calipers from a '92 Grand Marquis on my small bearing rear under my rig. Took a little fab work but not too bad.
Have you thought about weld on brackets for a dirt track car? I believe you can use either a '80's F150 or CJ7 front rotor with them and S10 calipers. You may have $100 in the entire swap with out an emergency brake. But if you need an E brake you can use Eldorado calipers at $100 a side. But if sheap and easy is what you want: http://www.speedwaymotors.com/p/3348,15_...20brackets
![[Image: 916-41008_R.jpg]](http://www.speedwaymotors.com/eccStoreFront/product_images/900/916-41008_R.jpg)
I used the brackets, rotors, and calipers from a '92 Grand Marquis on my small bearing rear under my rig. Took a little fab work but not too bad.
Have you thought about weld on brackets for a dirt track car? I believe you can use either a '80's F150 or CJ7 front rotor with them and S10 calipers. You may have $100 in the entire swap with out an emergency brake. But if you need an E brake you can use Eldorado calipers at $100 a side. But if sheap and easy is what you want: http://www.speedwaymotors.com/p/3348,15_...20brackets
'72 TBA...