12-27-2007, 05:25 PM
Hey I just asked you this on your other post, are you using a prop vavle.
By pass it with standerd unions.
I should have told you I run strait tube from the master too each axle. No other parts. The prop valve on the frame can be pushed over and not allow fluid.
Give me a holler if you want.
Broncomatt
By pass it with standerd unions.
I should have told you I run strait tube from the master too each axle. No other parts. The prop valve on the frame can be pushed over and not allow fluid.
Give me a holler if you want.
Broncomatt
[SIGPIC][/SIGPIC]