08-25-2010, 12:42 PM
It is a rubber 2 peice seal, sticks out of the block some and out of the main cap some. You can usualy push the seal out of the block with a peice of coat hanger. The main cap is easy.
You dont have too pull anything more than the oil pan, starter, maybe your y-pipe.
If the block side is hard to get out, loosen all the main bolts a few turns, takes the press off the seal. Besure to lube it good when you put it back in, and be very carefull to not peal any rubber off the seal as you push it in.
You dont have too pull anything more than the oil pan, starter, maybe your y-pipe.
If the block side is hard to get out, loosen all the main bolts a few turns, takes the press off the seal. Besure to lube it good when you put it back in, and be very carefull to not peal any rubber off the seal as you push it in.
[SIGPIC][/SIGPIC]