09-07-2011, 08:40 AM
FireFighter and Chuzie.....that'll get me started for tonight....and Chuzie....NO!!! Good try though.
I do believe that the horn is getting power...it "tooted" just as I was removing the sleeve indicating a short of some kind short in the system, which I thought was the loose wire un-attahced from the floater ring (copper). I'll truble-shoot the best I can and try not to electrocute myself in the process.
The A/M LPL has a single wire coming from the back of it. I was told that the housing acts as the ground, so that needs to be grounded to the body. I plan on fabbing a small plate to replace the original until I can get the wiring squared away.
Again, this all has to work for one show and one show only.....the NC Inspection. Thanx Guys.
Anymore suggestions would be awesome!!!!
I do believe that the horn is getting power...it "tooted" just as I was removing the sleeve indicating a short of some kind short in the system, which I thought was the loose wire un-attahced from the floater ring (copper). I'll truble-shoot the best I can and try not to electrocute myself in the process.
The A/M LPL has a single wire coming from the back of it. I was told that the housing acts as the ground, so that needs to be grounded to the body. I plan on fabbing a small plate to replace the original until I can get the wiring squared away.
Again, this all has to work for one show and one show only.....the NC Inspection. Thanx Guys.
Anymore suggestions would be awesome!!!!