02-25-2013, 11:08 AM
(This post was last modified: 02-25-2013, 11:15 AM by broncosbybart.)
x2, Crawdad.
BTW, that is the box that the 4x4x2 conversion is based off of. you will need to modify the mounting points. when I did the one on the ECORS racer, I bought the frame kit from chuck at BC broncos. I know you can weld, but if you don't have a plasma cutter, I'd say don't do it. There was a pretty healthy amount of cutting, grinding, fitting, and welding required. It isn't what I'd consider a 'weekend warrior' type of project. Not referencing you there, but the majority of the 'tinker on your bronco for fun' types.
oh, here is a link to a few pics of the install:
http://www.cb4x4.com/forums/showthread.p...uild/page5
BTW, that is the box that the 4x4x2 conversion is based off of. you will need to modify the mounting points. when I did the one on the ECORS racer, I bought the frame kit from chuck at BC broncos. I know you can weld, but if you don't have a plasma cutter, I'd say don't do it. There was a pretty healthy amount of cutting, grinding, fitting, and welding required. It isn't what I'd consider a 'weekend warrior' type of project. Not referencing you there, but the majority of the 'tinker on your bronco for fun' types.
oh, here is a link to a few pics of the install:
http://www.cb4x4.com/forums/showthread.p...uild/page5