Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What to do with my Bronco II's?
#11
Mtrhd0024 Wrote:haha hmm okay! only problem is unless its around 2 months from now...im not there to get it! :bdent:

What generaion/year is it anyway? you know?

I'll keep watching it, you never know!! :xyxthumbs:
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply
#12
trkbilder Wrote:I'll keep watching it, you never know!! :xyxthumbs:

Haha fair enough Confusedupergrin: roughly what year/generation is it?
1990 Bronco II Eddie Bauer Edition, 1989 Bronco II XLT, But what to do to them???? :rubeyes:
Reply
#13
Mtrhd0024 Wrote:Haha fair enough Confusedupergrin: roughly what year/generation is it?

I think it's 1st gen, maybe 87. I haven't been up close yet. Try to do that tomorrow!! :xyxthumbs:
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply
#14
trkbilder Wrote:I think it's 1st gen, maybe 87. I haven't been up close yet. Try to do that tomorrow!! :xyxthumbs:

do you mean a 77? cuz an 87 wouldnt be a first gen :S lol...

but anyway, thanks for goin to the trouble of looking!

If it was a 77, that would make it like the last year (i think?) of the round headlight version? in which case I would absolutely LOVE to own that! haha!
1990 Bronco II Eddie Bauer Edition, 1989 Bronco II XLT, But what to do to them???? :rubeyes:
Reply
#15
Mtrhd0024 Wrote:do you mean a 77? cuz an 87 wouldnt be a first gen :S lol...

but anyway, thanks for goin to the trouble of looking!

If it was a 77, that would make it like the last year (i think?) of the round headlight version? in which case I would absolutely LOVE to own that! haha!

No it's not an EB, it is a B2 1st gen. and it is a1987 XLT 5 spd.
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply
#16
trkbilder Wrote:No it's not an EB, it is a B2 1st gen. and it is a1987 XLT 5 spd.

Oopss lol completelyy misread that! I see you put BII in your post but with all the talk about re-shelling an EB with a BII i misread it as being an EB! My bad haha. Hmm well the fact that its a 5 speed is a plus, maybe if its still there in a couple months I'll get rid of the 89 an go for a 1st gen BII. Then I could do a retro lookin one.

Thanks for takin a look at it! :xyxthumbs:

To be honest I probably need to get back home, and end up doing something to one of em on a whim! Haha im so undecided about what would be best that I'll just do something one day and that'll be it an I'll be happy enough with that decision lol!! When I can't exactly mess with either of em, i get to thinkin far to hard about what ta do to em! Haha.

So on an unrelated note, is anybody on here from the greensboro, high-point area?
1990 Bronco II Eddie Bauer Edition, 1989 Bronco II XLT, But what to do to them???? :rubeyes:
Reply
#17
Hmm so I ran across something yesterday that really made me droollll :crying:

Saw a couple pictures of Pre-Runner Bronco II's, and it really got me thinking! Confusedupergrin:

I mean... Have a look at these:
[Image: dsc_0039.jpg]

[Image: B2.jpg]

[Image: dsc_0028.jpg]

[Image: dsc_0030.jpg]

[Image: Solo1.jpg]

[Image: B2prerunner1.jpg]

[Image: B2prerunner.jpg]

[Image: B2prerunner2.jpg]

[Image: B2-1.jpg]

[Image: BRONCO3SM.jpg]

Thats BAD A$$!!!

You can buy all the fiberglass parts to do it on this website:
http://www.mcneilracinginc.com/off-road-...index.htm#

And they also sell the conversion pieces to convert the front end to look like a new ranger.

If I just wanted the front and rear fenders to fit stright on a 90 BII, i'd be lookin $700 for all four. Didn't surpise me that much somehow, although paying 3 1/2 times what I paid for the Bronco seems bad! :hysterical:

ugh i shouldn't have just thought about it that way! :hysterical:

But anyway, I'd wanna buy myself a nice wrecked 4.0 gen 1 Explorer, then do a 4.0 conversion, an 8.8 disc rear-end swap, dana 35 front end, and some of those fender flares, plus a cage and some nice comfy buckets would make one sweett truck! Then down the road when i recover from paying for all those mods, I could go long travel! :xyxthumbs:

Imagine a truck with something similar to this bumper:
[Image: Pre-Runner%20Ranger%20Bumper.jpg]

This Light rack:
[Image: 3kf3o53l0ZZZZZZZZZ958cbafa0bfddd61885.jpg]

And those fender flares, with possibly an updated style front end, on 32's or 33's with long travel suspention! That would be crazyyy cool lookin!! :toothy12:

And the thing about doing something like that is, that all the bodywork thats in poor condition on my 89, would be replaced or covered up by the fiberglass! :xyxthumbs:

Me likey this idea! :biggthumpup: Especially since I'm more into driving at speed than crawling through rocky trails! Not that I wouldn't do some of that too though! Confusedupergrin:
1990 Bronco II Eddie Bauer Edition, 1989 Bronco II XLT, But what to do to them???? :rubeyes:
Reply
#18
Man, don't be doing this stuff!! You've gone and got me to thinking mods again!! :xyxthumbs:
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply
#19
trkbilder Wrote:Man, don't be doing this stuff!! You've gone and got me to thinking mods again!! :xyxthumbs:

Hahaha! I think a prerunner BII would be awesome though!!

Wouldn't make a wonderful prerunner just because of the short wheelbase, but for lower speed stuff it would be ok, and it would just be soo cool!! :xyxthumbs:

I told you I think WAY too much! As soon as I can come home and start tearing into one of them, I'll have to stick with that plan and can finally stop changing my mind!! :biggthumpup: :bdent: Confusedupergrin:
1990 Bronco II Eddie Bauer Edition, 1989 Bronco II XLT, But what to do to them???? :rubeyes:
Reply
#20
If you're like me, broke, daydreaming is all I can afford!! LOL :xyxthumbs:
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1996 Ford Bronco- Body Bushing Install jrshepherd 2 2,407 09-19-2018, 02:50 PM
Last Post: blazinchuck
  Stainless/ Coated Headers needed- 1995 Bronco 351 Windsor .20 over trick flow heads jrshepherd 1 3,228 05-22-2018, 09:38 PM
Last Post: broncosbybart
  1977 Ford Bronco rear ended 9" rebuild Crawdad 10 5,138 01-19-2017, 12:53 PM
Last Post: snipes243
  BC Bronco Soft Top knoxville714 3 3,125 07-12-2016, 08:04 PM
Last Post: blazinchuck
  1996 Bronco New BSD 4" long arm lift on IFS suspension- Setting Wheelbase jrshepherd 11 3,799 01-31-2016, 03:55 PM
Last Post: broncosbybart
  Another Bronco Floor Replacement jdowns67 83 14,239 12-20-2014, 11:33 AM
Last Post: jdowns67
  Mystery Bronco, need your expertise to solve 1st Bronco 2 2,873 08-04-2013, 10:48 PM
Last Post: 1st Bronco
  OK. I love my Bronco again Timstrk 3 2,507 05-19-2013, 08:43 PM
Last Post: chuzie
  Bronco Help Around Greenwood Jbass 29 12,762 01-20-2013, 03:16 PM
Last Post: broncosbybart
  Bronco techs in/near Raleigh? Mbowles 10 2,609 11-30-2012, 07:07 PM
Last Post: Mbowles

Forum Jump:


Users browsing this thread: 9 Guest(s)