Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
ok guys cant seem to win for losing right now. got the carb issue straightened out now i have a fuel leak. i have a rubber hose connecting fuel pump to a plastic yeah plastic line dont think it was stock back to a rubber line then to sending unit. plastic line runs entire length of frame. was this some presidental engineering of some sort? its leaking at rear plastic line is split. any ideas? i want to correct this issue the right way. thanks in advance
asiel
Posts: 251
Threads: 12
Joined: Aug 2008
Reputation:
0
The plastic line is stock. It's 5/16 nylon, nothing special.
Just cut the plastic back past the split and extend your rubber line.
If you want to replace the plastic you can get it at JBG or any of the bronco vendors for about $20.
Socialism is GREAT!
Until you run out of other peoples money!
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
I got a whole rubber line gonna run it inside frame rail one piece better than 3
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
well inside frame rail didnt work but new line is installed was able to use factory hangers though so not all bad runs great now! thanks guys
Posts: 251
Threads: 12
Joined: Aug 2008
Reputation:
0
Good deal.
It won't be long till you have a brand new rig!
Socialism is GREAT!
Until you run out of other peoples money!
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
wouldnt be so bad but i neglected to mess with it for the last couple years. worst thing you can do is let one sit.
