Cam advice....

[bucketobolts]

I was not sure which Trick Flow heads your running, so I used the High Port flow #'s with 2.02/1.80 valves. If your running a different set up I can modify it with no problems. But that combo seems to be a pretty good one. Looks like it makes just under 400HP and almost 400FtLbs of torque from 3-5K.

[blazinchuck]

wow, thats not bad...ill see if i can get the actual list of parts, maybe you wouldnt mind doing one more for me when i get the info? Thanks Aaron!!!!!

[blazinchuck]

heres a quick run down, just talked to Jeff(PO)
'95 truck block true roller
stock crank(balanced and polished)
stock rods w/ARP bolts
trick flow roller cam/roller lifters
Crane 1.6 roller rockers
performer RPM alum intake
Probe forged domed pistons w/ plasma moly rings
block bored .30 over plus .01 over for NOS
trick flow twisted street head 2.02/1.60
ARP head studs
TCI torque converter 1000rpm stall over stock