Posts: 510
Threads: 25
Joined: Feb 2010
Reputation:
0
Looking at the DUI Distributor?ELectronic Ignition to replace my point distro... Any known glaring drawbacks? seems like a simple celan installation with one wire hook-up which i really like, also eliminates the ballast resistor...
I knwo there are cheaper ways to go about it, but i think i like the rpo's to this set-up, and just want to know if there are any cons i should be aware of...
Posts: 446
Threads: 44
Joined: Oct 2007
Reputation:
0
without a body lift it may hit the hood (especially the brace that runs across the hood)
If not running stock air cleaner, you have to find a fairly small aftermarket cleaner that will work.
Other than that, they work great.
'73 Bronco - trail modified
Posts: 510
Threads: 25
Joined: Feb 2010
Reputation:
0
Thanks Nick, Just placed the order...
Posts: 2,525
Threads: 67
Joined: May 2006
Reputation:
0
I have one in my wife's '74 and love it. I had to modify the hood cross-member for clearance since I do not have a BL though. Other than that, very clean and has not given me any trouble for 5+ years now.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
Posts: 510
Threads: 25
Joined: Feb 2010
Reputation:
0
thanks for the pic!
I placed an order with BC a couple weeks ago, and got everything i ordered but the dizzy... Called em' and they said it was shipping straight form the manufacturer, but didnt give me a tracking number... gonna call back today... ive heard some stories about poor customer service and shipping issues concerning BC, but also heard some good ones... i hope this thing gets here soon, or its gonna put a hitch in Sick Pony's Gitty-up...
Posts: 510
Threads: 25
Joined: Feb 2010
Reputation:
0
OK, Dizzy is here, and i am almost done with the install... i think... Haha!
I have 2 questions... First, where did you guys source your 12 volt ign on power? just curious how others went about it...
And second, how much does it matter where the vaccuum port point? i.e. dizzy body orientation? by my logic, if the rotor is where the old rotor was, and the plugs are in their original location, then you should be close for timing... i just noticerd that jdowns has his pointing forward, and mine is pointing at the drivers side wheel well... never changed or installed a dizzy before, so just wanna be sure i have everything in order...
Posts: 2,525
Threads: 67
Joined: May 2006
Reputation:
0
With a carb engine you can turn the dizzy however you want as long as you line the plug wires up. I would still find tdc either way and check your wiring order.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
Posts: 295
Threads: 39
Joined: Sep 2010
Reputation:
0
Yea what SC74 says. By the way, I don't use my vacuum advance. I have tried both and have the best results running like this. Can't remember where I got my 12v power. I think I tapped into an un-used wire on the drivers side near the firewall that was for something related to emissions or the factory carb. If you need more detail, let me know.
JD