03-03-2013, 12:23 AM
well iive waited long enough...ive had the kit since summer last year. a couple things are going to take place.
1) ididit tilt steering column
2) rostra cruise control
3) southern rods ac/heater assembly
4) BC broncos EFI throttle cable
5) removing the mustang heater crossover tube on the intake
the column should be here a couple days...so i started with that. removing it and of coarse, one of the upper 2 bolts snapped off(creating another problem!)drained the coolant, and removed the mojave heater. next was trying to remove the dash...but the roll cage wasnt having that.:banghead:
lifting the cage was even more of a pain in the a**...way to heavy. had to remove the center console,stereo,seats...then call a buddy of mine to drop by to help lift it up and move it back enough.:crying:
removed all the wiring going to the dash, and got it out. started checking clearance for the new evaporator/heater. i already measured way back when i ordered the kit. and i was pretty sure it would work...and so far looks like i was correct.had to relocate the EEC...got it mounted again in another spot. also got the broken bolt drilled out and retapped.
im done for tonight...i still have a lot ahead of me. ive given myself 2 weeks to knock all this out...with any luck, that will be the case.
1) ididit tilt steering column
2) rostra cruise control
3) southern rods ac/heater assembly
4) BC broncos EFI throttle cable
5) removing the mustang heater crossover tube on the intake
the column should be here a couple days...so i started with that. removing it and of coarse, one of the upper 2 bolts snapped off(creating another problem!)drained the coolant, and removed the mojave heater. next was trying to remove the dash...but the roll cage wasnt having that.:banghead:
lifting the cage was even more of a pain in the a**...way to heavy. had to remove the center console,stereo,seats...then call a buddy of mine to drop by to help lift it up and move it back enough.:crying:
removed all the wiring going to the dash, and got it out. started checking clearance for the new evaporator/heater. i already measured way back when i ordered the kit. and i was pretty sure it would work...and so far looks like i was correct.had to relocate the EEC...got it mounted again in another spot. also got the broken bolt drilled out and retapped.
im done for tonight...i still have a lot ahead of me. ive given myself 2 weeks to knock all this out...with any luck, that will be the case.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.