C4 question

[cuz1]

I won a C4 on ebay out of an early bronco. It comes with the dana 20 as well. I called the guy and told him to send the tranny but he could keep the dana 20. It will save over $100.00 not to get the dana 20.

The question is

Is there anything off the dana 20 that I need for it to be complete?

carl

[bucketobolts]

It would be wise to get the transfer case also. You will need the input spud shaft and the seal adapter.

[johnpaulgolf]

Carl where is the tranny?

I would think even if you don't use the D20 it would be worth getting all of it.

Then you could sell or keep it for a spare ect.

just my .02

[broncomania]

get em both. is it a t or j shift ? i here t shift is geared lower.
i would like to have the case to rebuild for my bronco. before i say that i should askj if the t is stronger than the j or = in strength ?
call me carl 336-669-6956 i might give you the $100.00 for it.

[johnpaulgolf]

t-shift=2.46
j-shift=2.34

not alot of difference but enough.

as far as strength...hmmm I don't know

[broncomania]

t-shift=2.46
j-shift=2.34

not alot of difference but enough.

as far as strength...hmmm I don't know

:beer:
i cant afford a stak right now so i thought i would help carl and buy that one and build it up a little. someone that knows a lot about these should post up the differences and upgrades you can buy for them up in the tech or how to articles section.

[johnpaulgolf]

this will help your D20

http://www.wildhorses4x4.com/product/dan...a20_T-Case
http://www.wildhorses4x4.com/product/Ext...a20_T-Case

[broncomania]

this will help your D20

http://www.wildhorses4x4.com/product/dan...a20_T-Case
http://www.wildhorses4x4.com/product/Ext...a20_T-Case

according to that i can just build my case and have the same thing.

[SC74]

this will help your D20

http://www.wildhorses4x4.com/product/dan...a20_T-Case
http://www.wildhorses4x4.com/product/Ext...a20_T-Case

I've been debating whether or not to go that route or a Stak case. I'd hate to get $1,200 deep and regret not doing a Stak and having 3 speeds. It is nice to know that WH has a sale on the HD output shafts now though.

[broncomatt]

Get the case carl, you cant have too many spares. Plus, yours has that funky front output yoke(and needs overhaul). A spare rear out put is worth its weight in gold as it is the weak link of that case.
To save the coin of going atlas I would get the lower gear set. I'm not a fan of doubling, the eb has too short a wheel base for it to work well.
Broncomatt