Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stuck rear axle? (9")
#1
You all are on the other side of the Country from me but have a great site and some good info. So I have a passenger side axle that is stuck and I mean stuck. It is a 73 that I have had over 25 years so may have never been apart-Not sure-I have beat-pulled- pried-cussed-used a drum for a slide hammer-What do i try next?
Thanks Jack
Reply
#2
Had the exact same issue on my rig at URE in November. We spent all night and part of the next day trying to get that sucker out. We tried everything!!!

Anyway, what finally worked was heat, a scissors jack pushing from the back, and a hammer pounding on the axle housing around the bearing. We were at a campsite so not really the most ideal conditions plus we were under a time constraint to get back on the trail.

I would heat it up a little then use plenty of PB Blaster in the bearing area. Then let it sit overnight and try what I mentioned above.

Good luck!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#3
a slide hammer works the best as it pulls from the center out.
74 Sport Howell EFI & 33's sitting in the yard
73 104 in EB Buggy 5.0 SEFI ,C-4,38's Busy as Hell Building it right now.
00 Honda XR 650R For Sale.Someone buy this bad assed Bike ASAP.
03 Honda Shadow Spirit
Reply
#4
Well I got it. a little tug and a few taps from a big (15lb) hammer and out she came.
Thanks Jack

   

   

   
Reply
#5
lol...for a second, i thought ya used the skid steer to pull it. nice looking bronco, i like those corner guards in the rear. chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#6
Yea-Just pulled it as tight as I could with the straps and then beat it with a sledge and bang here it came. Put a smile on my face. Now went to install pumpkin using Right Stuff-Tube was badConfusedcratchhe:
Jack
Reply
#7
That'd a been awesome though, if you did use the skid steer to pull it out. I don't know why, I just thinks its bad A$$!
[SIGPIC][/SIGPIC]
79 FS 351M, Trac loc HPD44, Detroit 9", 4.56's, 37 Toyo's, 17" Helo Maxx 6
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1977 Ford Bronco rear ended 9" rebuild Crawdad 10 5,174 01-19-2017, 12:53 PM
Last Post: snipes243
  Rebuilding used rear leaf springs Crawdad 5 4,295 12-12-2016, 11:54 AM
Last Post: Crawdad
  Lighted rear view mirror chuzie 6 4,724 06-20-2015, 12:18 AM
Last Post: chuzie
  rear main seal snipes243 5 2,988 05-03-2014, 11:45 AM
Last Post: chuzie
  stock rear drums scbronco 11 2,624 03-06-2014, 08:09 PM
Last Post: Bronco Biff
  Late 70s Cadi rear disc brakes for 77 banjo rear end Crawdad 11 3,890 01-11-2014, 12:26 AM
Last Post: Crawdad
  77 EB Rear Drive Shaft Dropped - Second time in six months UTFLIWGYA 4 2,042 12-01-2013, 10:38 PM
Last Post: broncomatt
  Axle Tube Vents Casey835 4 1,432 03-01-2013, 08:20 PM
Last Post: Casey835
  Grinding sound from rear end area when driving Crawdad 10 4,490 02-09-2013, 09:33 PM
Last Post: blazinchuck
  '94 351 Rear Main replacement JayT 5 1,657 12-22-2012, 05:34 PM
Last Post: JayT

Forum Jump:


Users browsing this thread: 1 Guest(s)