08-23-2016, 02:48 PM
Painless or Centech are both good and not hard to put in. If ordering one you may want to specify that is has the v8. If yours was a 6cyl some wires are in
the wrong place. I would start with a new harness, if the draw still happens after that. Put a test light between the neg terminal like chuck said. Then pull one
fuse at a time till it goes out. Thats the circuit you need to trace out for the draw.
the wrong place. I would start with a new harness, if the draw still happens after that. Put a test light between the neg terminal like chuck said. Then pull one
fuse at a time till it goes out. Thats the circuit you need to trace out for the draw.
[SIGPIC][/SIGPIC]