06-05-2008, 09:50 PM
I guess I wrenched on the fitting to the high pressure side one too many times. It has been leaking at the base of the fitting ever since I pulled it off the other day for maintenance. I even bought a new Aeroquip steel fitting in hopes the old brass fitting was just junk with stretched threads but I still have the leak so the only thing left is to replace the PS pump unless someone knows of a place in town that is willing to re-port the housing with a slightly larger size to replace the old damaged one for less than the $55.00 it is going to cost me to purchase a reman from DAPs.
Oh, in case any of you are scratching your head, I am referring to the '96 Explorer V8 PS pump I am running in my rig, not the canned ham.
Oh, in case any of you are scratching your head, I am referring to the '96 Explorer V8 PS pump I am running in my rig, not the canned ham.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
mokin:
Roads? Where we're going, we don't need roads.
![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
mokin:Roads? Where we're going, we don't need roads.