ididit install

[blazinchuck]

try reversing the turn signal wires...i bet right now the run lights in the front are using the "brighter" element..which wont draw enough causing the flasher to work...just a thought

[chuzie]

I had the same problem when I was doing my harness. Just trying to remember how I fixed it.

[berg bronco]

I had the same problem when I was doing my harness. Just trying to remember how I fixed it.

think hard! i tried reversing the wires, but no luck.

[chuzie]

The hazard and turn have separate flashers.

Few quick questions...

When was the last time you had turn signals that worked?

Do you have power going to the turn signal flasher from the main power (i.e. fuse panel, 12V source)?

If so,

What color wire do you have going from the turn flasher to the column plug?

It sounds as though you are not getting power to the column from the turn flasher. Respond with the info and we can go from there.

Also, is your horn working? Seems as though you are either missing a circuit or have an earlier setup that does not incorporate a horn relay.

[berg bronco]

both flashers work
the turn signals worked just like they should before install of the new column
I could not find a wire to match up with the "purple"feed wire from the column
so i temp. hooked it to the 12v horn wire "this could be my problem"
if so what wire do i hook the purple feed wire to?
also if my stock column worked with the before mentionedwires in my previous post why would i need a "new" wire for the new column?

[Mill Knob]

both flashers work
the turn signals worked just like they should before install of the new column
I could not find a wire to match up with the "purple"feed wire from the column
so i temp. hooked it to the 12v horn wire "this could be my problem"
if so what wire do i hook the purple feed wire to?
also if my stock column worked with the before mentionedwires in my previous post why would i need a "new" wire for the new column?

If you don't have the promblem sovled by tomorrow when I get home I will call you and we will talk and see what we can come up with.
:biggthumpup:

[chuzie]

the purple wire may not have anything to do with the turn signal but to be sure I need to know what color wires you have hooked up to the flasher and, in turn, where that wire is hooked into the column.

[berg bronco]

heres what I got


iididit column centech harness
black-horn-----------------------------yellow-horn
light blue-left front turn-----------------2 light blue-left turn
dark blue-right front turn----------------2 dark blue-right turn
brown-hazard---------------------------brown hazard
purple-turn flasher feed------------------? temp.gray horn power
yellow-left rear turn---------------------yellow-left stop
green-right rear turn--------------------green- right stop
white-brake switch----------------------white-stop switch

[chuzie]

My first thought is to follow the line from the turn flasher into the column. I would venture to bet it needs to be connected to the purple wire. I will see if I can pull some other data and trace some diagrams for you to be sure of what is going on. I am sure of one thing, that purple turn feed has no business being connected to the horn.

[berg bronco]

ya I know:bdent:i was just using it for a power source when I unhook it i only have the hazards