Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Another Bronco Floor Replacement
#31
Looking good. Who made the inner rocker? The ones I've used in the past didn't have the indention for the Ford logo or the cutouts for the lower fender mounting bracket
Reply
#32
broncosbybart Wrote:Looking good. Who made the inner rocker? The ones I've used in the past didn't have the indention for the Ford logo or the cutouts for the lower fender mounting bracket

It came from Jeff's.
Reply
#33
[Image: WP_20140322_14_15_09_Pro.jpg]

Got the inner rocker painted, drilled, and screwed in place. Started looking at the kick panel. A little worried. I had to get a bottle jack and lift up on the body to get it to line up.
Reply
#34
[Image: WP_20140322_14_08_11_Pro.jpg]
[Image: WP_20140322_14_08_25_Pro.jpg]

If I measure from the floor to the bottom of the dash on the passenger side I get 5-1/2". To get the panels to line up on the driver side I have to jack it up to about 6-1/2". Wonder if I screw the kick panel in place there and then release the jack it things will settle back where they are supposed to be.
Reply
#35
[Image: WP_20140329_12_39_57_Pro%255B1%255D.jpg]
[Image: WP_20140329_12_42_35_Pro.jpg]
[Image: WP_20140329_13_25_23_Pro.jpg]
[Image: WP_20140329_15_44_41_Pro.jpg]
Reply
#36
that looks really good!!! i know you been hard doing a lot of metal work!!!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#37
Thanks Chuck, hopefully the other side will go much quicker!
Reply
#38
OK well I'm pretty sure I know why my truck was a roadster when I got it. I think I said something earlier in this thread about noticing that my Bronco had been in a front ender. There's no way in hell I'm gonna get the 39-1/2" measurement I have from the top edge of the fender to the top edge of the quarter panel I get on the passenger side (door opening). The best I can get is 39-1/4" with the bolt holes on top pushed all the way forward. Can someone give me their measurement?
Reply
#39
Y'all Sure are a quiet bunch!


[Image: WP_20140408_19_28_09_Pro.jpg]
[Image: WP_20140408_19_27_17_Pro.jpg]
[Image: n72Xo9Qz74tnF9yp01OBvVKN-6Hnh7YH0ZesTy0m...21-h587-no]
Reply
#40
Sorry, just saw this. I'll try and get a measurement off of mine tomorrow. Looking good!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1996 Ford Bronco- Body Bushing Install jrshepherd 2 2,379 09-19-2018, 02:50 PM
Last Post: blazinchuck
  Stainless/ Coated Headers needed- 1995 Bronco 351 Windsor .20 over trick flow heads jrshepherd 1 3,214 05-22-2018, 09:38 PM
Last Post: broncosbybart
  1977 Ford Bronco rear ended 9" rebuild Crawdad 10 5,094 01-19-2017, 12:53 PM
Last Post: snipes243
  BC Bronco Soft Top knoxville714 3 3,107 07-12-2016, 08:04 PM
Last Post: blazinchuck
  1996 Bronco New BSD 4" long arm lift on IFS suspension- Setting Wheelbase jrshepherd 11 3,756 01-31-2016, 03:55 PM
Last Post: broncosbybart
  Mystery Bronco, need your expertise to solve 1st Bronco 2 2,860 08-04-2013, 10:48 PM
Last Post: 1st Bronco
  OK. I love my Bronco again Timstrk 3 2,495 05-19-2013, 08:43 PM
Last Post: chuzie
  Bronco Help Around Greenwood Jbass 29 12,700 01-20-2013, 03:16 PM
Last Post: broncosbybart
  '94 351 Rear Main replacement JayT 5 1,635 12-22-2012, 05:34 PM
Last Post: JayT
  Bronco techs in/near Raleigh? Mbowles 10 2,570 11-30-2012, 07:07 PM
Last Post: Mbowles

Forum Jump:


Users browsing this thread: 7 Guest(s)